POWER TRAIN
TM 5-3805-263-14&P-2
DISASSEMBLY AND ASSEMBLY
BRAKE AND WHEEL SPINDLE HOUSINGS
DISASSEMBLE BRAKE AND WHEEL
SPINDLE HOUSINGS
Tools Needed
A
B
C
1
8H684
Ratchet Box Wrench
1
7M3976
Adapter
1
1
8B7554
Bearing Cup Pulling Attachment
8B7548
Puller Assembly
8B7551
Bearing Pulling Attachment
1
5F7369
Leg
2
8B7555
Adapter
2
1P820
Puller Group
1
8B7560
Step Plate
1
9S5800
Pump Group
1
1.
2.
3.
4.
5.
6.
7.
start by:
a) remove brake and wheel spindle hous-
ings
Remove wire (3) from the bolts. Remove
bolts (1). Remove retainer (2) and the shims
that are under the retainer.
Remove sprocket (4). Weight is 36 lb. (16
kg).
Remove bearing cone (5) from the spindle
and cover (6). Remove O-ring seal (7) from
cover (6).
Remove the bolts and plate (8) that hold
cover (6) to the housing. Install two 5/8”-
11 NC forged eyebolts in the cover. Fasten
a hoist to the eyebolts and remove the
cover. Weight is 50 lb. (23 kg). Remove
bearing cup (10) from the cover.
Remove O-ring seal (9) from the cover.
Remove hub (11) from the wheel spindle.
Remove ten discs (12) and nine disc assem-
blies from the housing.
2-48
