TM 5-3805-263-14&P-3
OPERATOR'S STATION
CAB WINDOW GLASS
CAUTION
Handle glass carefully.
4.
Put the bottom of window assembly (6) in the
channel of the seal as far as possible. Do not use
too much force.
5.
Move in both directions from the starting point and
lift the glass channel of the seal so the window
assembly can slip into position.
6.
Put a solution of soap and water on locking lip (7) of
the seal.
7.
Install the curved end of tool (A) between the
locking lip and groove (8) at any point away from
the joint. Move tool (A) along groove (8) as shown
until the locking lip is in its correct position around
the circumference of the window assembly.
4-91
