VEHICLE SYSTEMS
TM 5-3805-263-14&P-3
CONTROL VALVES
9. Make a check of the lever end clearance. End
clearance must be .006 + .003 in. (0.15 + 0.08
mm). To make an adjustment to the lever end
clearance use the following procedure:
a) Loosen nut (18).
b) Pull on the lever with a force of 25 lb.(110
N).
c) Tighten or loosen screw (19) to get the
correct end clearance.
d) Tighten nut (18)
10. Do Steps 2 through 9 for the other valves.
11. Put valve bodies (1) in position on manifold (20).
Put manifold (21) in position on the body. Install
bolts (22) that hold the valve bodies and the
manifolds together. end by:
a) install control valves .
3-253
