TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
HYDRAULIC PUMP
60. Turn the pump shaft with a torque wrench. The
torque needed to start shaft rotation must not be
more than 10 lb. ft. (14 Nm). The torque needed
to keep the shaft in rotation must not be more than
7 Ib. ft. (10 Nm).
NOTE: If the torque values are higher than the above
specifications, the pump must be disassembled and the
problem corrected.
61. See HYDRAULIC SYSTEM AND STEERING
SPECIFICATIONS.
62. Put yoke (77) in position on shaft and install nut
(78). Tighten nut to a torque of 135 10 lb. ft. (180
+ 14 Nm).
end by:
a) install hydraulic pump
3-249
