DISASSEMBLY AND ASSEMBLY
TM 5-3805-263-14&P-3
COMBINATION VALVE
9. Remove plug (36), spacers (35) and (34), valve
(33), spring (32) and body (31). Remove the O-
ring seals from the plug and the body.
.Remove plug (40), piston (39) and stem (38). Remove
the O-ring seal from the plug.
11. Remove connector (43), retainer (42), spring
(41) and valve (37). Remove the O-ring seal
from the connector.
ASSEMBLE COMBINATION VALVE
Tools Needed
A
8S2328
Dial Test Indicator Group
1
1. Install new O-ring seals.
2. Put valve (5) in position in the body. Install
spring (6), retainer (7). and connector (8).
3. Put stem (2) in position in the body. Install the
piston in the stem. Install plug (1) in the body.
4. Put body (12) in position in the body. Install the
spring and the valve in body (12). Install spacers
(4) and (9) and plug (3).
5. Put the washer and shims (11) in position on
stop (10). Put stop (10) in position in the body.
Install two springs (13) and plug (17).
6. Put valve (14) and spring (15) in position in the
body. Put shims (18) in position in retainer (16).
Install retainer (16) and plug (19).
7. Put washer (23) and spring (22) in position on
spool (24). Put the spring in compression. Put
retainers (21) in position on the spool.
8. Put the spool in position in the body. Install plug
(20).
3-256
