TM 5-3805-263-14&P-3
VEHICLE SYSTEMS
CIRCLE DRIVE
DISASSEMBLE CIRCLE DRIVE
Tools Needed
A
B
8B7548
Puller Assembly
1
1
8H684
Ratchet Box Wrench
1
8H663
Bearing Puller Attachment
1
8B7550
Leg
2
8B7554
Bearing Cup Puller Attachment
1
start by:
a) remove circle drive
1. Put the circle drive in position on blocks as shown.
Remove four nuts (1), retainer housing (2) and
shims from housing assembly.
2. Remove bearing cup (3) from retainer housing.
3. Remove five bolts (5) and cover (4). Remove
coupling (6) and the worm gear with bearings.
4. Remove bearing (7) from cover (4).
5. Remove bearings (8) and (10) from worm (9) with
tooling (A).
3-225
