DISASSEMBLY AND REASSEMBLY
TM 5-3805-263-14&P-3
ARTICULATION LOCK CHECK VALVE,
BLADE LIFT LOCK CHECK VALVE
BLADE FLOAT PILOT VALVE
REMOVE ARTICULATION LOCK CHECK VALVE
1. Put identification on the oil lines as to their
location on the valve. Disconnect oil lines (2) and
(3) from the valve.
2. Remove the washers and bolts (1) that hold the
valve to the frame.
3. Remove articulation lock check valve (4).
INSTALL ARTICULATION LOCK CHECK VALVE
1. Put articulation lock check valve (4) in position
on the frame. Install the washers and the bolts
that hold it.
2. Connect oil lines (2) and oil lines (1) to their
correct locations on the valve.
REMOVE BLADE LIFT LOCK CHECK VALVE
1. Put identification on the oil lines as to their
location on the valve. Disconnect oil lines (1),
(2), (4), (6) and (7).
2. Remove the washers and bolts (3) that hold the
valve to the frame. Remove the blade lift lock
check valve (5).
INSTALL BLADE LIFT LOCK CHECK VALVE
1. Put blade lift lock check valve (1) in position on
the frame. Install the washers and the bolts (3).
2. Connect oil lines (1), (2), (4), (6) and (7) on the
valve.
REMOVE BLADE FLOAT PILOT VALVE
3. Remove the two bolts that hold the valve to the
frame. Remove the blade float pilot valve (6).
1. Put identification on harness ends (4) and (5) as
to their location on the valve. Disconnect the
INSTALL BLADE FLOAT CHECK VALVE
harness.
1. Put the blade float pilot valve (6) in position on
the frame and install the mounting bolts.
2. Put identification on lines (1), (2), (3) and (7) as
to their location on the valve. Disconnect the oil
2. Connect harness ends (4) and (5) and oil lines
lines.
(1), (2), (3) and (7) on the valve.
3-160
