DISASSEMBLY AND REASSEMBLY
TM 5-3805-263-14&P-3
WHEEL LEAN AND CENTERSHIFT LOCK CHECK VALVES
REMOVE WHEEL LEAN AND CENTERSHIFT LOCK
CHECK VALVES
1. Remove bolts and washers (l) that hold cover (2)
to the frame.
2.Put identification on the oil lines as to their locations on
the valves. Disconnect oil lines (4) and (10) from the
wheel lean lock check valve. Remove bolt and washer
(9) from the valve. Remove wheel lean lock check valve
(7).
3. Disconnect oil lines (3) and (8) from the
centershift lock check valve. Remove the bolt
and washer (6) from the valve. Remove
centershift lock check valve (5).
INSTALL WHEEL LEAN AND CENTERSHIFT LOCK
CHECK VALVES
1. Put centershift lock check valve (1) in position on
the frame. Install the washer and bolt (5) that
hold it.
2. Connect oil lines (2) and (4) to their correct
locations on the valve.
3. Put wheel lean lock check valve (6) in position
on the frame. Install the washer and bolt that
hold it.
4. Connect four oil lines (3) to their correct
locations on the valve.
5. Put cover (7) in position on the frame. Install the
washers and bolts that hold it.
3-158
