VEHICLE SYSTEMS
TM 5-3805-263-14&P-3
CIRCLE DRIVE AND BLADE SIDESHIFT
LOCK CHECK VALVES
REMOVE CIRCLE DRIVE AND BLADE SIDESHIFT
LOCK CHECK VALVES
NOTE:
Some machines do not have blade
sideshift lock check valves.
1. Remove the washers and bolts (I) that hold
cover (2) to the frame. Remove the cover.
2. Put identification on the oil lines as to their
locations on the valves.
3. Disconnect oil lines (6) and (9) from the circle
drive lock check valve. Remove the washer and
bolt (8) that hold the valve to the frame. Remove
circle drive lock check valve (7).
4. Disconnect oil lines (3) and (10) from the blade
sideshift lock check valve. Remove the washer
and bolt (5) that hold the valve to the frame.
Remove blade sideshift lock check valve (4).
INSTALL CIRCLE DRIVE AND BLADE SIDESHIFT
LOCK CHECK VALVES
1. Put circle drive lock check valve (4) in position
on the frame. Install the washer and bolt (6) that
hold it.
2. Connect oil lines (2) and (7) to their correct
locations on the valve.
3. Put blade sideshift lock check valve (3) in
position on the frame. Install the washer and the
bolt that hold it.
4. Connect two oil lines (1) and two oil lines (5) to
their correct locations on the valve.
5. Put cover (8) in position on the frame. Install the
washers and bolts that hold it.
3-159
