SPECIFICATIONS
TM 5-3805-263-14&P-3
CLEARANCE ADJUSTMENT OF CONTROL VALVE
FOR PARKING BRAKE
(1) 2G3765 Spring
Length under test force ................................ 2 25 in.
Test force ............................. 15 1 2 lb. (67 5.3 N)
Free length after test................... 2 12 in (53 8 mm)
Outside diameter ....................... 562 in (14.27 mm)
(A) Clearance between piston on control valve and
plate
(2) with transmission control lock and
parking/emergency brake lever in
PARK position................................. 03 in. (0.8 mm)
ACTUATOR FOR PARKING BRAKE
(5T925)
With
the
transmission
control
lock
and
parking/emergency brake lever in the brake OFF position,
remove the pin from the rod end Push the lever up and
make an adjustment to the rod end until the lever has a
small amount of free movement.
Torque for the nut on the
rod end................................. 110 15 lb. h. (149 20 Nm)
(1) 8K8467 Spring
Free length............................... 9.50 in. (241.3 mm)
Outside diameter ..................... 5 25 in. (133 4 mm)
3-152
