TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-9. Directional and Pressure Control Valve. (Sheet 3 of 3)
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
NOTE
Return 130G Grader to
original equipment condition.
End of Task
14-63
1.
Install ball (15), new preformed packing (14) and plugs
(13 and 12) in body (16, Figure 14-90).
2.
Install stop (11) and dowel (10).
3.
Install spool (9) and springs (8 and 7, Figure 14-89).
4.
Install plate (6) and two bolts (5). Tighten two bolts (5) to
19-25 ft-lb. torque.
5.
Install spool (4, Figure 14-88).
6.
Install plate (3) and two bolts (2). Tighten two bolts (2) to
19-25 ft-lb. torque.
7.
Install items 16 thru 2 as an assembly and four bolts (1,
Figure 14-87) on control valve.
