TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont.)
14-8. Pilot Valve. (Sheet 3 of 3)
INSTALLATION
1.
Install two dowels (11) and detent (10) in
pilot valve body (12, Figure 14-86). Pilot
or lead end must face away from pilot
valve body (12) and protrude 0.23 to 0.27
inch.
2.
Install cup plug (8), plug (7) and dowel (6)
in spool (9, Figure 14-85).
3.
Install items 9 thru 6 as an assembly to
pilot valve body (12, Figure 14-84).
4.
Install new preformed packing (5), stop
(4), detent (3) and roll pin (2, Figure 14-
83).
5.
Install items 12 thru 2 as an assembly
and
four bolts (1,Figure 14-82) on control
valve.
NOTE
Return 13OG Grader to
original equipment condition.
Figure 14-82.
Figure 14-83.
Figure 14-84.
Figure 14-85.
Figure 14-86.
End of Task
14-60
