TM 5-3805-261-34
TRANSMISSION MAINTENANCE. (cont.)
14-9. Directional and Pressure Control Valve. (Sheet 2 of 3)
DISASSEMBLY
WARNING
Plates are under spring tension. Remove bolts slowly
and evenly. Failure to follow this procedure may cause
INJURY.
1.
Remove four bolts (1) and items 2 thru 16 as an assembly
(Figure 14-87) from control valve.
2.
Remove two bolts (2) and plate (3) from body (16, Figure
14-88).
3.
Remove spool (4).
4.
Remove two bolts (5) and plate (6) from body (16, Figure
14-89)).
5.
Remove springs (7 and 8) and spool (9).
6.
Remove dowel (10) and stop (11,Figure 14-90).
CAUTION
Do not remove ball (15)unless inspection shows
damage.
7.
Remove plugs (12 and 13),preformed packing (14) and
ball
(15) from body (16). Discard preformed packing (14).
CLEANING
Clean all parts. Refer to Chapter 2.
Figure 14-89.
Figure 14-88.
Figure 14-87.
Figure 14-90.
Go to Sheet 3
14-62
