TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
14-8. Pilot Valve. (Sheet 2 of 3)
REMOVAL
1.
Remove four bolts (1) and items 2 thru 12 as an
assembly (Figure 14-82) from control valve.
2.
Remove roll pin (2), detent (3), stop (4) and
preformed packing (5, Figure 14-83) from pilot
valve body (12). Discard preformed packing (5).
3.
Remove items 6 thru 9 as an assembly from pilot
valve body (12, Figure 14-84).
4.
Remove dowel (6), plug (7) and cup plug (8) from
spool (9, Figure 14-85).
5.
Remove detent (10) and two dowels (11) from pilot
valve body (12, Figure 14-86).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Figure 14-82.
Figure 14-83.
Figure 14-84.
Figure 14-85.
Figure 14-85.
Go to Sheet 3
14-59
