TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)
12-7. Circle Assembly. (Sheet 2 of 6)
REMOVAL
1.
Remove two nuts (1), washers (2)
and bolts (3, Figure 12-23) from
drawbar assembly.
2.
Remove two cotter pins (4),
washers (5), pin (6) and guide
(7).
3.
Using jack stands, support circle
(21, Figure 12-24).
4.
Loosen eight nuts (8).
5.
Turn eight setscrews (9) all the
way down.
6.
Remove eight lock nuts (10),
washers (11), bolts (12), washers
(13), four bolts (14), washers
(15), shoes (16), 24 shims (17),
28 shims (18), eight strips (19)
and four strips (20, Figure
12-25).
Go to Sheet 3
12-30
Figure 12-25.
Figure 12-23.
Figure 12-24.
