EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_806

EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.) - TM-5-3805-261-34_808

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
760

TM 5-380-261-34 EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE 12-6. Blade Brackets. (Sheet 2 of 5) REMOVAL 1. Support bar (15, Figure 12-19) by tying both ends to frame with rope. WARNING Use adequate hoist and sling for lifting. Failure to follow this procedure may cause INJURY. If you are injured, seek medical aid immediately. 2. Attach hoist and sling to bracket (9). 3. Remove cotter pin (1), nut (2), washer (3), nuts (4 and 5), washers (6 and 7), bolt (8) and bracket (9). Discard cotter pin (1). 4. Remove two washers (10). 5. Remove hoist and sling. 6. Remove nuts (11 and 12, Figure 12-20). 7. Remove two bolts (13) and washers (14). 8. Remove bar (15) and attached rope. 9. Remove rope from bar (15). Figure 12-19. Figure 12-20. Go to Sheet 3 12-25

Privacy Statement
Press Release
Contact