TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)
12-7. Circle Assembly. (Sheet 6 of 6)
INSTALLATION (cont.)
14. Tighten four bolts (14) and eight
bolts (12, Figure 12-24) to 310
to 340 ft-lb torque. Recheck
clearances and adjustments.
15. Remove jack stands from under
circle (21).
16. Install guide (7), pin (6), two
washers (5) and cotter pins (4,
Figure 12-23).
17. Install two bolts (3), washers
(2) and nuts (1).
NOTE
Return 130G Grader to
original equipment condition.
Figure 12-24.
Figure 12-23.
End of Task
12-34