TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE.
12-5. Drawbar Assembly. (Sheet 3 of 5)
REMOVAL
WARNING
Weight of drawbar is approxi-
mately 500 lbs. Use adequate
hoist and sling for lifting.
Failure to follow this
procedure may cause INJURY.
If you are injured, seek
medical aid immediately.
1.
Attach hoist and sling to drawbar
(18, Figure 12-16) under front of
vehicle.
2.
Position jack stands under three
corners of drawbar (18).
NOTE
The following is a mainte-
nance procedure for the right
drawbar assembly. The mainte-
nance procedure for the left
drawbar assembly is identical.
3. Remove two bolts (1), washers
(2), cap (3), two shims (4),
inserts (5 and 6) and two shims
(7) from rear corners of drawbar
(18).
4.
Remove four bolts (8), washers
(9) and two bolts (10) at front
corner of drawbar (18, Figure
12-17).
5.
Slide cap (17) onto drawbar (18).
6.
Lower drawbar (18) onto jack
stands with hoist and sling.
7.
Remove hoist and sling.
8.
Remove adapter (11) and shims (12
and 13) from front corner of
drawbar (18).
Figure 12-17.
Figure 12-16.
Go to Sheet 4
12-21
