TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE.
12-5. Drawbar Assembly. (Sheet 5 of 5)
INSTALLATION
3.
Install shims (13 and 12) and
adapter (11, Figure 12-17).
4.
Attach hoist and sling.
5.
Raise drawbar (18) into mounting
position.
6.
Install two bolts (10), four
washers (9) and bolts (8) in cap
(17) at front corner of drawbar
(18).
7.
Remove hoist and sling.
8.
Install two shims (7), inserts (6
and 5), two shims (4), cap (3),
two washers (2) and bolts (1) in
rear corners of drawbar (18,
Figure 12-16).
NOTE
Return 130G Grader to
original equipment condition.
Figure 12-17.
Figure 12-16.
End of Task
12-23