TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE. (cont.)
12-5. Drawbar Assembly. (Sheet 4 of 5)
REMOVAL (cont.)
9. Remove five bolts (14), ball
(15), fitting (16) and cap (17)
from drawbar (18, Figure 12-18).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1. Support drawbar (18, Figure
12-18) under front of vehicle on
jack stands.
2. Install cap (17), fitting (16),
ball (15) and five bolts (14) to
front corner of drawbar (18).
Go to Sheet 5
12-22
Figure 12-18.
