HYDRAULIC SYSTEM MAINTENANCE. (cont)

HYDRAULIC SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_715

HYDRAULIC SYSTEM MAINTENANCE. (cont) - TM-5-3805-261-34_717

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
669

TM 5-3805-261-34 HYDRAULIC SYSTEM MAINTENANCE. 10-15. Centershift Cylinder. (Sheet 3 of 6) REMOVAL 6. Remove two fittings (8), bolts (9), lockwashers (10) and cap (11) from rod (21, Figure 10-122). 7. Separate rod (21) from ballstud (23). 8. Remove shim(s) (12), two inserts (13) and shim(s) (14). Tie shim(s) (12 and 14) together and tag for identification. 9. Remove two bolts (15). lockwash- ers (16) and cap (17, Figure 10-123) from circle assembly. 10. Separate cylinder (22) from ballstuds (23 and 24) and lower onto suitable padding with hoist and sling. 11. Remove shim(s) (18), two inserts (19) and shim(s) (20). Tie shim(s) (18 and 20) together and tag for identification. 12. Remove hoist and sling. CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. Figure 10-122. Figure 10-123. 10-87

Privacy Statement
Press Release
Contact