TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENACE.
10-9.
Left Band Blade Lift and Scarifier Check and Relief Valves. (Sheet 3 of 4)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install four washers (25), spring
(24), four shims (23), shim(s)
(22), valve (21), new preformed
packings (20 and 19) and plug
(18) in body (26, Figure 10-75).
COLD PARTS HAZARD
Use gloves or tongs to handle
extremely cold parts, such as
those which have been chilled
in dry ice. Contact between
cold parts and your skin may
cause frostbite and other
INJURY. If you are injured,
obtain medical help immedi-
ately.
2.
Using dry ice or freezer, lower
temperature of seat (17).
3.
Using an alignment punch and
hammer, install seat (17).
4.
Install piston (12).
5.
Using dry ice or freezer, lower
temperature of seat (11).
6.
Using an alignment punch and
hammer, install seat (11).
Go to Sheet 4
WARNING
Figure 10-75.
10-55
