TM 5-3805-261-34
REAR AXLE MAINTENANCE. (cont)
5-19.
Differential. (Sheet 2 of 2)
REMOVAL
Weight of differential is 500
lbs. Use adequate hoist and
sling for lifting. Failure
to follow this procedure may
cause INJURY. If you are
injured, seek medical aid
immediately.
1.
Attach hoist and sling to
differential.
2.
Remove ten nuts, washers and
differential (Figure 5-111).
3.
Remove hoist and sling.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Attach hoist and sling to
differential.
2.
Position differential to trans-
mission (Figure 5-111).
3.
Install ten washers and nuts.
4.
Remove hoist and sling.
NOTE
Return 130G Grader to
original equipment condition.
WARNING
Figure 5-111.
End of Task
5-90
