TM 5-3805-261-34
CHARGING SYSTEM MAINTENANCE. (cont)
4-5.
Alternator (Bosch). (Sheet 2 of 12)
DISASSEMBLY
1.
Position alternator in soft jawed
vise.
NOTE
Using scriber, matchmark frames and stator to aid in
assembly.
2.
Remove nut (1), two washers (2), fan (3) and
key (4) from inner frame (27, Figure 4-19).
3.
Remove two screws (5), washers (6) and cover
(7, Figure 4-20).
NOTE
Testing of capacitor is necessary prior to removal.
4.
Test capacitor (12). Refer to Testing, step 1.
5.
Remove nut (8) and lockwasher (9).
NOTE
All wire, cable and harness assemblies must be
tagged before disconnecting to aid in installation.
6.
Disconnect capacitor (12) wire assembly at
terminal.
7.
Remove screw (10), lockwasher (11) and
capacitor (12) from frame (54).
Figure 4-19.
Figure 4-20.
Go to Sheet 3
4-24