TM 5-3805-261-34
CHARGING SYSTEM MAINTENANCE.
4-4.
Alternator (Delco). (Sheet 15 of 18)
ASSEMBLY
34. Position items 51 thru 47 as an assembly (Figure
4-5).
35. Install three insulators (39), washers (38),
lockwashers (37) and bolts (36) loosely.
36. Tighten nut (41). Stud (45) must be properly
seated.
37. Tighten three bolts (36).
38. Install new gasket (46), stud (45), new gasket
(44), washer (43), lockwasher (42), nut (41) and
stud (40) loosely.
39. Install insulator (35, Figure 4-4).
40. Position regulator (34).
41. Install three washers (33), two lockwashers (32
and 31) and screws (30).
Figure 4-5.
Figure 4-4.
Go to Sheet 16
4-19
