TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE.
3-30.
Governor Controls. (Sheet 18 of 21)
INSTALLATION
71.
Tighten nut (59) securing rod end (58) in housing
(70, Figure 3-175) under right side of operator’s
compartment.
72.
Install new gasket (55), cover (54), five washers
(53) and bolts (52).
73.
Position clip assembly with hydraulic hose on cover
(54).
74.
Install washer (51) and bolt (50).
75.
Tighten four nuts (42) at left and right sides of
articulation area.
Go to Sheet 19
3-185
Figure 3-175.
