TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE. (cont)
3-30.
Governor Controls. (Sheet 7 of 21)
REMOVAL (cont)
49.
Remove bolt (62, Figure 3-161).
50.
Remove three bolts (63) and washers (64).
51.
Pull items 65 thru 72 as an assembly away
from mounting bracket and at the same time
pull lever (80) away from items 65 thru 72 as
an assembly.
52.
Remove items 65 thru 72 as an assembly.
53.
Remove shaft (67) and keys (68 and 69).
54.
Remove items 71 and 72 as an assembly.
55.
Remove bolt (71) from lever (72, Figure 3-163).
NOTE
Removal of bearings from housing may
cause destruction of bearings. Remove
bearings only if inspection indicates
replacement is necessary.
56.
Inspect bearings (65 and 66, Figure 3-162). Replace
if cracked, broken or worn.
57.
Using suitable driver and hammer, remove bearings
(65 and 66), if necessary, from housing (70).
Go to Sheet 8
3-174
Figure 3-163.
Figure 3-162.
Figure 3-161.
