TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE. (cont)
3-27.
Governor and Fuel Injection Pump. (Sheet 2 of 9)
TEST/ADJUST
Check fuel injection pump timing.
Refer to paragraph 3-7.
NOTE
Perform static fuel adjust-
ment if governor or fuel
injection pump have been
repaired.
STATIC FUEL ADJUSTMENT
1.
Remove secondary fuel filter (1,
Figure 3-99) from fuel injection
pump.
2.
Remove four bolts (2), cover (3)
and gasket (4). Discard gasket
(4). Remove all gasket material
from mounting surfaces.
3.
Install collett on indicator
bracket (Figure 3-100).
4.
Install indicator bracket.
Engage bracket lever in fuel rack
slot (Figure 3-101). Tighten
bracket to pump housing. The
lever on indicator bracket
(Figure 3-100) must move smoothly
when governor control is moved
from high to low idle.
5.
Install contact point on dial
indicator (Figure 3-102).
Go to Sheet 3 Figure 3-102.
3-136
Figure 3-99.
Figure 3-100.
Figure 3-101.
