TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-17.
Engine Oil Cooler. (Sheet 2 of 3)
REMOVAL
1.
Remove plug (1, Figure 3-75) on left side of
engine.
2.
Drain engine coolant.
3.
Install plug (1) after engine coolant is drained.
4.
Remove bolt (2), disconnecting oil gage and
tube (3) from coolant tube.
5.
Remove seven bolts (4).
6.
Loosen two bolts (8) from transmission oil
cooler enough to remove oil cooler (5). Do not
remove bolts (8).
7.
Remove oil cooler (5) and gaskets (6 and 7)
from left side of engine. Discard gaskets (6
and 7). Remove all gasket material from
mounting surfaces.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 3-75.
Go to Sheet 3
3-98
