TM 5-3805-261-34
ENGINE MAINTENANCE.
3-12. Rocker Arm Assembly. (Sheet 9 of 13)
INSTALLATION
26.
Install screw (16) and lock nut (15) in arm (14,
Figure 3-48). Loosely tighten lock nut (15).
27.
Install arm (14) on shaft (55).
28.
Install dowel (13) in bracket (12). Dowel (13)
must extend 0.23 inch out of bracket (12).
29.
Install bracket (12) on shaft (55).
30.
Install screw (11) and lock nut (10) in arm (9).
Loosely tighten lock nut (10).
31.
Install items 11 thru 9 as an assembly (Figure
3-49).
32.
Install washer (8), spring (7), washer (6) and
ring (5) on shaft (55, Figure 3-48).
NOTE
Install push rods and lifters in original position.
Figure 3-48.
Figure 3-49.
Go to Sheet 10
3-73
