TM 5-3805-261-34
ENGINE MAINTENANCE.
3-12. Rocker Arm Assembly. (Sheet 5 of 13)
REMOVAL
28.
Remove lock nut (43) and screw (44) from
arm (42, Figure 3-55).
29.
Remove items 45 thru 47 as an assembly
(Figure 3-57).
30.
Remove and discard preformed packing (46)
from bracket (45, Figure 3-55).
31.
Using hammer and punch, remove dowel (47)
from bracket (45).
32.
Remove items 48 thru 50 as an assembly
(Figure 3-58).
33.
Remove lock nut (49) and screw (50) from
arm (48, Figure 3-55).
34.
Remove washer (51), spring (52), washer (53)
and ring (54) from shaft (55).
35.
Remove and discard two plugs (56) from shaft
(55, Figure 3-59). Drill and pry out two plugs
(56).
Figure 3-57.
Figure 3-58.
Figure 3-59.
Go to Sheet 6
3-69
