TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-12. Rocker Arm Assembly. (Sheet 2 of 13)
REMOVAL
1.
Remove four bolts (1) and washers (2, Figure
3-47) from top of cylinder head.
2.
Remove items 5 thru 55 as an assembly. Pull
straight up to remove from cylinder head.
NOTE
Each push rod and lifter must be numbered during
removal so it can be installed in same position.
3.
Remove eight push rods (3).
4.
Using magnet, remove eight lifters (4).
5.
Remove ring (5), washer (6), spring (7) and
washer (8, Figure 3-48).
6.
Remove items 9 thru 11 as an assembly
(Figure 3-49).
7.
Remove lock nut (10) and screw (11) from
arm (9, Figure 3-48).
8.
Remove bracket (12) from shaft (55).
9.
Remove dowel (13) from bracket (12).
10.
Remove arm (14) from shaft (55).
11.
Remove lock nut (15) and screw (16) from
arm (14).
Go to Sheet 3
3-66
Figure 3-49.
Figure 3-48.
Figure 3-47.
