TM 5-3805-261-34
BRAKE MAINTENANCE. (cont)
14-20. Service Brakes. (Sheet 10 of 10)
ASSEMBLY (cont)
37. Install retainer (2) and three
bolts (1). Tighten three bolts
(1) to 35 ft-lb torque while
turning housing (27).
38. Remove three bolts (1) and
retainer (2).
39. Using a caliper, measure distance
between end of sprocket (4) and
spindle (31).
40. Install shim(s) (3) which have
total thickness equal to distance
measured in step 39 minus 0.010
to 0.015 inch.
41. Install retainer (2) and three
bolts (1). Tighten three bolts
(1) to 192 ft-lb torque.
NOTE
Return 130G Grader to
original equipment condition.
Figure 14-149.
End of Task
14-118