TM 5-3805-261-34
BRAKE MAINTENANCE. (cont)
14-20. Service Brakes. (Sheet 8 of 10)
ASSEMBLY (cont)
NOTE
Make sure there is a disc
assembly between each disc.
23. Install new seal (12) in cover
(14, Figure 14-151).
24. Coat seal (12) with grease.
25. Using dry ice, lower temperature
of cup (13).
26. Install cup (13) in cover (14).
27. Install two 5/8-llNC forged
eyebolts in items 14 thru 12 as
an assembly (Figure 14-150).
28. Install hoist and sling.
29. Install items 14 thru 12 as an
assembly in housing (27).
30. Remove hoist and sling.
31. Remove two 5/8-llNC forged
eyebolts.
Figure 14-151.
Figure 14-150.
Go to Sheet 9
14-116