TM 5-3805-261-34
BRAKE MAINTENANCE.
14-20. Service Brakes. (Sheet 9 of 10)
ASSEMBLY
32. Install seal (6) in cover (14,
Figure 14-149).
33. Coat seal (6) with grease.
34. Install three lockwashers (11),
bolts (10), plate (9), lockwasher
(8) and bolt (7).
35. Install cone (5) over spindle
(31).
NOTE
The sprocket for the front
service brake and wheel
spindle housing must be
installed with teeth next to
cover. The sprocket for the
rear service brake and wheel
spindle housing must be
install with teeth away from
cover.
36. Install sprocket (4) over splines
on spindle (31).
Figure 14-149.
Go to Sheet 10
14-117
