TM 5-3805-261-34
STEERING MAINTENANCE.
15-2. Steering Cylinder. (Sheet 3 of 5)
DISASSEMBLY
9.
Remove items 14 and 15 as an
assembly from rod (16, Figure
15-6).
10. Remove seal (15) from crown (14,
Figure 15-7). Discard seal (15).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install seal (15) into crown (14,
Figure 15-7).
2.
Install items 15 and 14 as an
assembly on rod (16, Figure
15-6).
3.
Coat ring (13), new preformed
packing (12) and new seals (11
and 10, Figure 15-5) with
lubricating oil.
4.
Using seal installer, install
ring (13). new preformed packing
(12) and new seals (11 and 10) in
head (9). Lip of seal (11) is
toward inside of head (9). Lip
of seal (10) is toward outside of
head (9).
Figure 15-6.
Figure 15-7.
Go to Sheet 4
15-5
