TM 5-3805-261-34
STEERING MAINTENANCE. (cont)
15-2. Steering Cylinder. (Sheet 2 of 5)
DISASSEMBLY
NOTE
For convenience, hydraulic
cylinder should be mounted on
a suitable repair stand.
1.
Remove two rings (1) and bearing
(2, Figure 15-1).
2.
Using suitable chain wrench,
loosen crown (14).
3.
Remove cylinder (3).
4.
Remove bolt (4) and washer (5,
Figure 15-2).
5.
Remove items 6 thru 8 as an
assembly.
6.
Remove ring (7) and seal assembly
(8) from piston (6, Figure 15-3).
Discard seal assembly (8).
7.
Remove items 9 thru 13 as an
assembly (Figure 15-4).
8.
Remove seals (10 and 11),
preformed packing (12) and ring
(13) from head (9, Figure 15-5).
Discard seals (10 and 11) and
preformed packing (12).
Figure 15-1.
Figure 15-2.
Figure 15-3.
Figure 15-5.
Figure 15-4.
Go to Sheet
3
15-4
