TM 5-3805-261-23-2
SERVICE BRAKE AND WHEEL SPINDLE HOUSING ASSEMBLY REPLACEMENT - CONTINUED
0314 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Brake and wheel spindle housing assembly weighs 350 lb (159 kg).
1.
Install sling on brake and wheel spindle housing assembly (8).
2.
Install two 7/8-14 nuts on studs (11).
3.
Install brake and wheel spindle housing assembly (8) to tandem drive housing assembly (10).
4.
Install 10 new lockwashers (13) and nuts (12).
5.
Remove two 7/8-14 nuts from studs (11).
6.
Remove sling.
SLING
10
7/8-14
NUTS
11
8
13 12
397-4255
0314 00-4