TM 5-3805-261-23-2
SERVICE BRAKE AND WHEEL SPINDLE HOUSING ASSEMBLY REPLACEMENT - CONTINUED
0314 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Brake and wheel spindle housing assembly weighs 350 lb (159 kg).
4.
Install sling assembly on brake and wheel spindle housing assembly (8).
5.
Install two 7/8-14 nuts on studs (11).
6.
Remove ten nuts (12) and lockwashers (13). Discard lockwashers.
7.
Use ratchet assembly to remove brake and wheel spindle housing assembly (8) from tandem drive housing assembly
(10).
8.
Place brake and wheel spindle housing assembly (8) on wood blocks.
9.
Remove two 7/8-14 nuts from studs (11).
10.
Remove sling assembly.
SLING
10
7/8-14
NUTS
11
8
13 12
397-4255
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
0314 00-3