TM 5-3805-261-23-2
REMOTE STEER AIR VALVES REPLACEMENT (TYPE II MACHINE) - CONTINUED
0315 00
REMOVAL
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Each of two steer air valves is removed the same way. Left steer air valve is shown.
Tag air lines before disconnecting to aid in installation.
1.
Disconnect air lines (3, 6, and 9) from three elbows (2)
2
3
1
4
5
2
of steer air valve (1).
2.
Remove three elbows (2) from steer air valve (1).
3.
Disconnect air line (5) from elbow (4) at top of tee (8).
2
4.
Remove elbow (4) from tee (8).
5.
Disconnect air line (7) from bottom of tee (8).
6
6.
Remove tee (8) from steer air valve (1).
9
397-4378
8
7
NOTE
Note position of plug at top of steer air valve for installation.
7.
Remove two bolts (10) and steer air valve (1) from
1
11
12
10
valve bracket (11).
8.
Remove two nuts (15), four washers (16), two bolts
(17), and valve bracket (11) from bracket (12).
NOTE
Perform steps 9 and 10 to remove bracket
from top of transmission.
9.
Remove two bolts (13) and washers (14).
10.
Remove two bolts (18), washers (19), and bracket (12)
from transmission.
397-4380
13,14
18,19
15,16,17
0315 00-2
