TM 5-3805-261-23-2
REMOTE STEER AIR VALVES REPLACEMENT (TYPE II MACHINE) - CONTINUED
0315 00
INSTALLATION
NOTE
Each of two steer air cylinders is installed the same way. Left steer air cylinder is shown.
Perform steps 1 and 2 to install bracket to top of transmission.
1.
Install bracket (12) to transmission with two washers (14) and bolts (13).
2.
Install two washers (19) and bolts (18).
3.
Install valve bracket (11) to bracket (12) with two bolts (17), four washers (16), and two nuts (15).
NOTE
Ensure plug at top of steer air valve is in position noted. Change position if necessary.
4.
Install steer air valve (1) to valve bracket (11) with two bolts (10).
5.
Install tee (8) to steer air valve (1).
6.
Connect air line (7) to bottom of tee (8).
7.
Install elbow (4) to top of tee (8).
8.
Connect air line (5) to elbow (4).
9.
Install three elbows (2) to steer air valve (1).
10.
Connect air lines (3, 6, and 9) to three elbows (2).Install left and right side engine panels (WP 0182 00).
END OF WORK PACKAGE
0315 00-3/(-4 Blank)