TM 5-3805-261-23-2
STEERING ARMS AND TIE ROD MAINTENANCE - CONTINUED
0301 00
REMOVAL - CONTINUED
41
42
30.
Remove locknut (42), bolt (44), and clamp (41). Dis-
43
card locknut.
31.
Remove socket assembly (45) from steering tie rod
45
(43).
44
397-4175
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install socket assembly (45) on steering tie rod (43).
2.
Install clamp (41), bolt (44), and new locknut (42). Tighten locknut to 55 lb-ft (76 Nm).
3.
Install plug (37), new gasket (39), and plug (38) in
31
32
housing (36).
4.
Install seal (40), new preformed packing (35), and seal
33
(34).
5.
Install washers (31, 32, and 33).
34
35
36
37
397-4174
40
38
39
0301 00-6