TM 5-3805-261-23-2
REAR BLACKOUT LIGHT WIRING HARNESS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Equipment Conditions
Maintenance Level
Machine parked on level ground (TM 5-3805-261-
Direct Support
10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-261-
10)
Tool kit, general mechanic's (Item 89, WP 0348 00)
Implements lowered to ground (TM 5-3805-261-
Materials/Parts
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Battery cables disconnected (WP 0125 00)
Strap, tie (Item 43, WP 0349 00)
Right and left engine side screen doors opened (WP
Tag, marker (Item 44, WP 0349 00)
0055 00)
References
Baffles removed (WP 0053 00)
Grille removed (WP 0054 00)
WP 0021 00
REMOVAL
NOTE
3
Tag and note routing of wiring harnesses
4
2
before disconnecting to aid in installation.
5
1
1.
Disconnect rear blackout light wiring harness (2) from
right blackout light (1).
2.
Remove two bolts (13), washers (14), and small clips
(15).
15
3.
Remove two bolts (10), washers (11), and large clips
6
(12).
14
4.
Disconnect rear blackout light wiring harness (2) from
13
left blackout light (3).
5.
Remove two bolts (5), washers (4), and small clips (6).
6.
Remove two bolts (7), washers (8), and large clips (9).
12
11
10
8
7
9
397-4090