TM 5-3805-261-23-2
FRONT BLACKOUT LIGHT WIRING HARNESS REPLACEMENT - CONTINUED
0288 00
INSTALLATION
CAUTION
Do not position front blackout light wiring harness against any rough surface. Failure to follow this proce-
dure may cause chafing.
NOTE
Route front blackout light wiring harness exactly as it was removed.
1.
Position front blackout light wiring harness (5) on machine.
2.
Connect front blackout light wiring harness (5) to main blackout light wiring harness (4) and attach to clip (3).
3.
Install new lockwasher (12) on left-front frame of machine.
4.
Connect wire assembly (8).
5.
Install washer (7) and bolt (6).
6.
Install seven new tie straps (2).
7.
Install front blackout light (1) and new lockwasher (11).
8.
Connect wire assembly (10) to bottom of front blackout light (1).
9.
Install nut (9).
10.
Connect front blackout light wiring harness (5) to back of front blackout light (1).
11.
Install left side frame cover (WP 0179 00).
12.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0288 00-3/(-4 Blank)