TM 5-3805-261-23-2
SUPPLEMENTAL STEERING MAIN WIRING HARNESS REPLACEMENT - CONTINUED
0290 00
INSTALLATION
CAUTION
Do not position supplemental steering main wiring harness against any rough surface. Failure to follow this
procedure could cause chafing.
NOTE
Route supplemental steering main wiring harness exactly as it was removed.
1.
Position supplemental steering main wiring harness (3) from machine.
2.
Disconnect supplemental steering main wiring harness (3) from electronic control (4) (WP 0089 00), ground (2), alter-
nator wire assembly (1) (WP 0066 00), magnetic switch (5) (WP 0102 00), fuse box (13) (WP 0096 00), steering pres-
sure switch (12) (WP 0112 00), dump valve harness (11) (WP 0131 00), monitor panel harness (7), indicator light (8)
(WP 0078 00), and manual switch (6) (WP 0076 00).
3.
Install new tie straps (9) and clips/clamps (10).
4.
Install steering control console plates (WP 0197 00 or WP 0198 00).
5.
Install left and right side engine panels (WP 0182 00).
6.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0290 00-3/(-4 Blank)
