TM 5-3805-261-23-2
REAR SIGNAL LIGHT AND BACKUP ALARM WIRING HARNESS REPLACEMENT - CONTINUED
0285 00
REMOVAL
1.
Remove three nuts (8), washers (10), and clips (1).
3
1
NOTE
Tag and note routing of wiring harnesses
2
before disconnecting to aid in installation.
4
2.
Disconnect rear signal light and backup alarm wiring
5
6
harness (9) from main wiring harness (7).
10
3.
Remove bolt (6), washer (5), and clip (2).
4.
Cut and discard tie strap (4).
9
5.
Disconnect rear signal light and backup alarm wiring
harness (9) from rear work light wiring harness (3).
8
7
397-4085
6.
Disconnect two wire assemblies (17) from rear signal light and backup alarm wiring harness (9).
7.
Remove rear signal light and backup alarm wiring harness (9) from clip (19).
8.
Disconnect wire assembly (12) from rear signal light and backup alarm wiring harness (9).
9.
Remove rear signal light and backup alarm wiring harness (9) from clip (18).
10.
Disconnect wire assembly (11) from rear signal light
15
14
and backup alarm wiring harness (9).
12 13
16
11.
Remove rear signal light and backup alarm wiring har-
11
ness (9) from clip (13).
19
12.
Disconnect wire assembly (15) from rear signal light
and backup alarm wiring harness (9).
18
13.
Remove rear signal light and backup alarm wiring har-
9
ness (9) from clip (14).
14.
Disconnect wire assembly (16) from rear signal light
and backup alarm wiring harness (9).
15.
Remove rear signal light and backup alarm wiring har-
17
ness (9) from machine.
397-4086
CLEANING AND INSPECTION
1.
Clean and inspect all parts in accordance with WP 0021 00.
2.
Repair rear signal light and backup alarm wiring harness, if necessary (WP 0021 00).
0285 00-2