TM 5-3805-261-23-2
GOVERNOR CONTROLS MAINTENANCE - CONTINUED
0282 00
ADJUSTMENT - CONTINUED
14.
Adjust position of cable end (53) to housing (23) and housing (55). Ensure shoulder of each cable end is approximately
0.75 in. (19 mm) from face of housing.
15.
At engine, set governor lever (8) to a 52-degree angle for the low idle position.
16.
With governor lever (8) and governor control handle (152) in low idle position, adjust cable ends to allow for connection
to levers inside housings (23) and (55).
17.
Check engine shutoff by pulling up on accelerator treadle. There should be a distinct detent for off position.
HIGH IDLE
55
15.25 IN.
(38.7 CM)
SHUTOFF
0.75 IN.
8
(19.0 MM)
LOW IDLE
53
397-2280
0282 00-26