TM 5-3805-261-23-1
BLADE TIP CYLINDER REPLACEMENT - CONTINUED
0244 00
INSTALLATION
1.
Attach sling to blade tip cylinder (3) assembly.
2.
Use sling to position blade tip cylinder (3) assembly to machine.
3.
Install pin (5) to connect one end of cylinder (3) to machine.
4.
Install bolt (4) through pin (5).
5.
Position other end of cylinder (3) to machine and position two spacers (11) in alignment with hole through cylinder.
CAUTION
Use care not to damage seals of cylinder.
6.
Carefully push pin (12) through machine, spacers (11),
1
2
and cylinder (3).
3
4
7.
Install new cotter pin (13) in pin (12).
5
13
8.
Remove sling.
12
9.
Install new preformed packing (2) and elbow (1) to
cylinder (3).
10.
Connect hose assembly (6) to elbow (1).
11.
Install new preformed packing (10) and connector (9)
to cylinder (3).
12.
Install new preformed packing (9) and connect hose
11
assembly (7) to connector (8).
7
10
9
6
8
397-1599
13.
Start engine (TM 5-3805-261-10).
14.
Operate control levers and cycle system through at least five full-travel movements to bleed air from system.
15.
Stop engine and check for leaks.
16.
Check hydraulic oil level and fill as necessary (WP 0216 00).
END OF WORK PACKAGE
0244 00-4
