TM 5-3805-261-23-1
BLADE LIFT CYLINDER REPLACEMENT - CONTINUED
0245 00
REMOVAL
CAUTION
Cap hose ends to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
This procedure covers the left blade lift cylinder. Follow these instructions for the right blade lift cylin-
der.
4
1.
Disconnect hose assembly (1) from connector (3).
5
3
Remove and discard preformed packing (2).
2
2.
Remove connector (3) and preformed packing (4)
1
6
16
from cylinder (9). Discard preformed packing.
14 15
7
3.
Disconnect hose assembly (12) from elbow (11).
8
Remove and discard preformed packing (13).
4.
Remove elbow (11) and preformed packing (10). Dis-
card preformed packing.
5.
Remove nut (14), washer (15), spacer tube (5), clamp
13
(6), washer (7), and bolt (8).
12
6.
Separate two clips (16) with hose assemblies (1 and
12) from blade lift cylinder (9) assembly.
10
9
11
397-1600
0245 00-2
