TM 5-3805-261-23-1
CENTERSHIFT CYLINDER REPLACEMENT - CONTINUED
0243 00
INSTALLATION
1.
Attach sling to centershift cylinder (6) assembly.
SLING
2.
Apply thin coat of grease to ballstud (20) and two
inserts (25) of machine.
6
20
NOTE
Install enough spacer plate(s) to prevent
excessive clearance around ballstuds. Be
sure there is an equal number of spacer
plate(s) on each side of ballstud. Inserts
must fit snugly on ballstuds.
3.
Install spacer plate(s) (26) and one of two inserts (25)
on centershift cylinder (6) assembly.
4.
Position cylinder (6) on ballstud (20).
5.
Install one of two inserts (25), spacer plate(s) (24), cap
19
(23), two new lockwashers (21), and bolts (22). Adjust
21
for free play between ballstud (20) and inserts (25)
22
26 25
24
23
397-1592
6.
Apply thin coat of grease to ballstud (13) and two inserts (15).
7.
Install spacer plate(s) (14) and one of two inserts (15) on cylinder (6) assembly.
8.
Position rod (12) on ballstud (13) of machine.
9.
Install other inserts (15), spacer plate(s) (16), cap (17), two new lockwashers (18), and bolts (19). Adjust for free play
between ballstud (13) and inserts (15) (WP 0245 00).
10.
Remove sling.
11.
Install two lube fittings (11).
12.
Lubricate two lube fittings (11) (WP 0020 00).
SLING
12
11
13
11
14 15
16
17
18
19
6
397-1591
0243 00-5
